ECTS Series — More output, less energy, every hour
A parallel triple-screw extruder built for large plants. Double the engaging area of a twin-screw — 20–40% lower energy use and up to 50% more output at the same motor power. Made to run 24/7.
The ECTS is SunPring's enhanced extruder. Instead of two screws, it uses three parallel screws, so the material is engaged in two working zones — better mixing, more uniform cook, and the same tonnage on a smaller motor. It is the right choice when your plant runs long shifts and electricity is a real cost.
Why the triple-screw wins
ECTS series models
| Model | Main motor | Output | Typical use |
|---|---|---|---|
| ECTS1500S | 90 kW | 1000–2000 kg/h | Moving up in scale |
| ECTS2500S | 132 kW | 2000–3000 kg/h | Energy-focused plant |
| ECTS3500S | 160 / 200 kW | 4000–6000 kg/h | Large plant |
| ECTS5500S | 200 / 250 kW | 6000–8000 kg/h | Industrial scale |
Where the ECTS pays back
Why ECTS
- Lower cost per ton — energy saving pays back the difference in months.
- More capacity on the same site — squeeze up to 50% more output into existing space.
- Better cooking uniformity — double engaging area means every particle is treated the same.
- Built for high speed — up to 3000 rpm, tandem bearings, nitrided screws.
- One source, whole line — SunPring builds the complete plant around the ECTS.
Tell us your current output and local electricity price — we show you the energy saving and extra tons the ECTS can deliver, and send a factory-direct quote within 24 hours.
Contact SunPring Today
Send Inquiry Now
Click to connect with SunPring, our quick-response customer service will contact you soon. 100% Promise!